Hotline: 0915019551
Sản phẩm đã cho vào giỏ hàng

More Views

PROMOSOLV NEO A1

The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advise you. 

 Do not remove parts too quickly out of the drying zone to prevent unwanted loss of solvent. 

 Compatibility report with different materials is available on request. 

PROMOSOLV NEO A1 is especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. The very low surface tension allows to penetrate very tight or difficult to access spaces, making sure any cleaning chemistry is fully removed. 

The newly developed PROMOSOLV NEO range represents our products with an Ultra-low to No GWP & low atmospheric lifetime, in order to reduce global warming impact. The solvency power has also been improved, which contributes to an even better & faster cleaning performance. 

It can be used in combination with our TOPKLEANTM range in co-solvent cleaning process to offer an environmentally friendly solvent solution for degreasing without compromising on high cleaning performance. PROMOSOLV NEO A1 can also solubilize fluorinated, silicon and light oils in a mono-solvent cleaning process. 

PROMOSOLV NEO A1 is compatible with all metals and alloys, including very sensitive ones. It has also good compatibility with most plastics & elastomers, however it is necessary to test before use. 

PROMOSOLV NEO A1 is formulated with safety in mind, which resulted in a product that has no mention of any EUH-phrases, is non-flammable, has no flash point and is PFAS free. 

This product also exists in a recycled version (made from recycled solvent) under the name PROMOSOLV NEO A1 T

CHARACTERISTICS 

VALUES 

Density (g/ml) 

1.39 

Boiling point (°C/°F) 

54/129 

Freezing point (°C/°F) 

-82/-115 

Flash point 

No 

Surface tension (dynes/cm) 

17 

KB value 

44 

Vapor pressure (kPa @25°C/77°F) 

36,8 

Latent heat of vaporization (kJ/Kg @bp) 

213 

Specific heat (kJ/Kg.K @25°C/77°F) 

1.09 

Solubility of water (ppm) 

1500 

Relative evaporation rate (ether=100) 

64 

Electrical resistivity (Ohm.m) 

8.7x106 

Electrical conductivity (μS/m @23°C/73°F) 

1.1x10-1 

Thermal conductivity (W/K @25°C/77°F) 

0.135 

Kinematic viscosity (μm²/s @25°C/77°F) 

0.41 

Viscosity (mPa.s @25°C/77°F) 

0.57 

 SPECIFICATIONS 

VALUES 

METHODS 

Aspect 

Transparent, colorless 

Visual 

Purity (% weight) 

>99.5 

Internal / BRY-MO-121 

 PERFORMANCE 

 

 Thermally and chemically stable in use 

 The very low surface tension allows deep cleaning & rinsing of parts with complex geometry 

 Increased solvency power 

 Short cleaning, rinsing and drying times 

 

COST 

 

 Continuous recycling in equipment for a long bath-life 

 Can be returned for recycling and re-use 

 The relatively high boiling point reduces risk of solvent drag, so limiting consumption 

 

HSE 

 

 PFAS free 

 No Global Warming Potential (GWP) & no Ozon depletion potential (ODP) 

 Non-flammable & no flashpoint 

 Low environmental impact: GREENWAY product

 

Đặt hàng

0915 019 551
 

Giờ làm việc

T2 - CN : 8h00 - 18h00
 

Miễn phí vận chuyển

Đơn hàng trên 2 triệu
 

Hoàn tiền 100%

3 ngày kể từ khi mua