Sản phẩm đã cho vào giỏ hàng
NanoSlic NS series coated stencils are the most advanced solder paste stencils available today. Advanced chemistry has been developed to impart a highly Hydrophobic and Oleophobic surface to the apertures and contact side of the stencil. This non-stick surface resists solder paste build-up, significantly reducing the frequency of cleaning. The coating bonds to the aperture walls regardless of size or geometry. NS 100 improves paste release, enabling high yield printing with all area ratios.
NanoSlic can be applied to a wide variety of surfaces. The required thickness of the coating will depend on the application and the desired result.
Generally, the coating thickness with 1 – 4 microns (µ.) NanoSlic protects and enhances surfaces of metals, glass, ceramics, polymers and coatings and many plastics.
It is scratch resistant and creates a surface that is easy to clean. Curing takes place at room temperature or can be accelerated with heat.
NanoSlic NS series is robust and chemically resistant. It will not be affected by the large majority of commercial stencil cleaners. We have tested the cleaners below and found them to be compatible.
No Stencil Coating NanoSlic NS 100:
Slic™ Metal (2-5 micron grain size) 0.55 0.45
UltraSlic™ Metal (1-2 micron grain size) 0.50 0.40
Lower area ratios can be achieved depending upon the application.
