Sản phẩm đã cho vào giỏ hàng
TECHNOLOGY NS 605 is based on revolutionary NanoSlic technology. The advanced ceramic chemistry chemically bonds to surfaces while forming a hydrophobic/oleophobic layer at the air interface. NanoSlic 604 has a robust, abrasion resistant surface that repels water, oils and other chemicals. NanoSlic’s silicon based ceramic chemistry makes it an excellent insulator. The ultra-thin coating allows advanced protection with minimal weight.
PRE-CLEAN Prior to application surfaces should be free of fluxes, oils and other residues. Be sure that no lint, dust or other contamination remains prior to application of the coating.
APPLICATION NS 605 can be spray applied or dip coated. Coating should be done in a dust free area. In all cases, a consistent thickness and streak free layer should be achieved. NanoSlic 604 will obtain properties in the range of 2-4 microns dry film.
CURING NanoSlic 605 will dry to tack free in 30 minutes. Do not disturb the coating or re-coat during this time. The coating will fully cure in 48 hours at room temperature. With this schedule a 9H hardness will be achieved. Curing can be accelerated by drying in an oven with added humidity. Additional data on cure schedules is available. In all cases the coating should not be put into an oven until drying at room temperature for 30 minutes. Typical schedule is as follows: 1. Application 2. Room temperature dry 30 minutes 3. Oven, 1 hour @ 50-100C and 50-75% RH a. Hardness: 7H 4. Overnight Cure a. Hardness 9H
