Sản phẩm đã cho vào giỏ hàng
TECHNOLOGY: MicroShield coating is based on FCT’s revolutionary oncontact surface modification technology. The advanced chemistry chemically bonds to the surface while forming a hydrophobic/oleophobic nano-layer at the air interface. MicroShield has a robust, abrasion resistant surface that stands up to repeated cleaning.
PRIMER: Fold a MicroShield applicator cloth once in each direction to form a 4.5-inch pad. Apply .25oz/7ml of primer to the pad and scrub entire surface area of the stencil in a circular motion being sure to press firmly against the foil. Pay close attention to the areas around the apertures ensuring a thorough cleaning of the foil surface.
APPLICATION: Fold another MicroShield applicator cloth and apply .25oz/7ml of the MicroShield coating to the center of the folded applicator. Immediately apply to the surface of the stencil in a circular pattern at a vigorous pace. Pay close attention to the areas around the apertures. Continue until the cloth becomes dry.
ATTRIBUTES • Instant surface modification • Outstanding Hydrophobic and Oleophobic Properties • Imparts “Easy-To-Clean” Property • Abrasion resistance • Conforms to surface
BUFFING: After 2 minutes the surface should be buffed vigorously with a dry MicroShield applicator for 90 seconds to remove and residue that is left. Some stencils will take less time if only focusing on the area around the aperture. To aid in the buffing process an electric palm buffer can be used. Buffing with this method requires 90 seconds but will require less effort. Place an opened dry MicroShield applicator cloth on the foil and place the palm buffer on the cloth and lightly buff for the required time.
CURING: MicroShield coating does not “cure” as a traditional polymer coating. MicroShield will instantly transform the surface oncontact. Performance typically improves with time. With a thickness in the nanometer range any hardness measurements will be measuring the underlying metal surface.
