Adhesive - Epoxy - Sealant - Bonding in Electronics Technology

1. 

   WACKER- ELASTOSIL® RT 747 TC

   Features of ELASTOSIL® RT 747 TC • One-component• Thermally conductive• Low viscosity for fast pouring / dispensing applications• Self-levelling• Good electrical insulation propertiesApplicationsFor heat ablation in potting applications in electronic devices such as• Automotive electronics• Coil potting• Electric drives• Various kinds of electronics control units Product Properties of   ELASTOSIL® RT 747 TCViscosity at     ... Xem thêm

   Liên hệ
2. 

   WACKER - SEMICOSIL® 811/871

   Features of SEMICOSIL® 811 • High flexibility, high-temperatureresistance and low-stress adhesive• Fast adhesion built-up at room temperature or with moderate energy input (< 10 min at 60 – 80 °C)• Reduced cycle times (faster processing)• In-line QC process possible• No UV-transparent substrates needed• Allows automated optical inspection control, blue fluorescence under black-lightApplications• Automotive electronics•... Xem thêm

   Liên hệ
3. 

   WACKER SilGel® 612/613/616/619 - POWERSIL® Gel C670

   Protection against vibrations and corrosion: the amount of electronic components in cars is constantly increasing. Encapsulation makes control systems resistant to everything that impacts on vehicles: vibrations, temperature fluctuations and moisture. Image: encapsulation of an automotive electronic controller with WACKER SilGel® 612 Typical silicone gels cure to form soft products. However, some applications require enhanced mechanical protection. For... Xem thêm

   Liên hệ
4. 

   WACKER - SEMICOSIL® 911/912/914/915/917/949/962TC

   Outstanding Electrical ParametersWith a silicone gel from WACKER, you have a material with outstanding electrical parameters. The reason for this is silicone gels’ high chemical purity and very low water uptake. In addition, silicones are exceptionally aging resistant due to their chemical structure. As a result, theymaintain their specific electrical properties for a long time.Resistant to... Xem thêm

   Liên hệ
5. 

   Oerlikon HS900 HS850/HS950 - Thermoelectrical Barrier Insulation Systems

   Thermal protection is essential to avoid overheating of the passenger compartment during inadvertent malfunction of lithium-ion batteries. Our product enables the fulfillment of legal safety demands, e.g., GB 38031-2020, with minimum installation space. We offer fully engineered solutions that meet customer requirements, validated in our state-of-the-art laboratory.Benefit from these HS900 material... Xem thêm

   Liên hệ
6. 

   DuPont™ Kalrez® 9600 - 9500 - 9300 - 9100 - 8002 - 8705

   Current Kalrez® Product Offerings for Plasma Application Kalrez® 9600 parts are designed for high purity, high temperature vacuum applications where seals are exposed to damaging Fluorine and Oxygen plasma radicals. It has an extremely low erosion rate and weight loss from plasma attack and provides excellent chemical resistance to Ammonia, Ozone, and Water Vapor. Its... Xem thêm

   Liên hệ
7. 

   E-Fill 2806 - 2805 Nickel Coated Graphite

   Oerlikon Metco’s E-Fill™2806 is an angular-shaped Ni/C ma-terial optimized for use in fine form-in-place (FFIP), extruded gaskets, moulded sheets and other conductive filler applica-tions where small particle size is required. E-Fill 2806 excels in applications where coated flanges are used. The angular shape of E-Fill 2806 coupled with Oerlikon Metco’s proprietary hard... Xem thêm

   Liên hệ
8. 

   Jowatherm® PO 238.20

   Jowat adhesives for car interiors support the efficiency of modern manufacturing processes with regard to all lamination methods, including VACFLOW – short process cycles, low energy consumption, and clean processing – as well as the specific requirements of the different parts. Our product range provides for each application suitable products... Xem thêm

   Liên hệ