Trang chủ
/ PROMOSOLV DR3

More Views

PROMOSOLV DR3

The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advise you.

 Do not remove parts too quick out of the drying zone to prevent unwanted loss of solvent.

 Compatibility report with different materials is available on request.

Mô tả sản phẩm
Bình luận
Tags sản phẩm

PROMOSOLV DR3 is especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. The very low surface tension allows to penetrate very tight or difficult to access spaces, making sure any cleaning chemistry is fully removed.

It can be used in combination with our TOPKLEANTM range in co-solvent cleaning process to offer an environmentally friendly solvent solution for degreasing without compromising on high cleaning performance. PROMOSOLV DR3 can also be used to remove fluorinated & silicon oils or for particles removal in a vapor phase or flushing cleaning process.

PROMOSOLV DR3 is compatible with all metals and alloys, including very sensitive ones. It has also good compatibility with most plastics & elastomers, however it is necessary to test before use.

PROMOSOLV DR3 is formulated with safety in mind, which resulted in a product that is non-flammable and has no flash point.

This product also exists in a recycled version (made from recycled solvent) under the name PROMOSOLV DR3 T

CHARACTERISTICS	VALUES
Boiling point (°C/°F)	61°C/142°F
Freezing point (°C/°F)	-135/-211
Flash point	No
Density (g/cm3)	1.52
Surface tension (dynes/cm)	13.6
Vapor pressure (mm Hg)	202
Dynamic viscosity (mPa.s)	0.75
Latent heat of vaporization (kJ/Kg@bp)	112
Specific heat (kJ/Kg.K)	1.17