THIẾT BỊ CÔNG NGHIỆP ĐIỆN TỬ

1. 

   Double layers PCB equipment

   1. Cutting: Cut the initial copper clad laminate into plates. 2. Drilling: Drill the hole diameter at the corresponding position on the sheet according to the material. 3. PTH: A thin layer of copper is deposited on the insulating hole wall by chemical method. 4. Exposure: Transfer the image on the production film... Xem thêm

   Liên hệ
2. 

   Baronete - Automatic Ultrasonic Vapor Degreaser Machine

   Technical Specifications Overall Dimensions : 27” Long x 24” Wide x 42” High Heat Input : 1,000 watts Power Supply : 120 VAC-1Ph-60Hz (20A GFCI) Refrigeration Unit : Air Cooled (¼ HP) R-513A Refrigeration Heat Load To Room : 3,000 BTU @ 200 CFM Thermal Capacity Per Hour : 25 Pounds Of Steel/20 Pounds Of Aluminum Distillation Rate : 1.8 GPH nPB (2.1 GPH... Xem thêm

   Liên hệ
3. 

   M Series Precision Vapor Degreaser

   We produce a vapor-only model (our MVR vapor degreasers), a liquid immersion model (our MLR vapor degreaser) and an ultrasonic vapor degreaser (our MSR model). These three different models are each available in five different sizes. Additionally, we develop and manufacture custom designs and sizes upon request. The M-Series vapor degreaser... Xem thêm

   Liên hệ
4. 

   Multi in one servo solution for industrial robots in full load range

   Industrial robots require high operating speed, trajectory accuracy, and repeat positioning accuracy, while also requiring transportation on the belt Maintain the stability of the robot during operation. Industrial robots are very typical multi axis control systems, which enable robots to achieve To achieve high repeat positioning accuracy, in addition to... Xem thêm

   Liên hệ
5. 

   IDS2000 Automated Dispensing Systems

   STANDARD FEATURES Digital Camera System Needle Calibration Purge Station Low Incoming Pressure Sensor Low Beacon with Alarm Dot Size Measurement Fiducial / Pattern Recognition OPTIONAL FEATURES Laser Height Sensor, LH Beads Height Measurement, BH Dispense Weight Monitoring and Compensation, DW Material Low Level Sensor, LS Cleaning Station, CS Needle / Syringe Heater, NH/SH 3 Stage Conveyor (Auto), C3 3 Stage Heating, HE Dual Lane Conveyor, DC Loader /... Xem thêm

   Liên hệ
6. 

   DPD50 Dual Cartridge Dispensing Systems

   Features Independent cartridge pressure and actuation functions to control adhesive flow rate Fluid components designed for dual cartridge adhesives Complete with positive shutoff valve Easy cartridge change-over Xem thêm

   Liên hệ
7. 

   MM1000 Positive Rod Displacement Meter Mix Dispensing System

   Standard Specifications Single acting positive displacement action Shot size: 1cc to 60cc, (1:1 ratio) Mix ratio 1:1 to 1:6** Low to medium viscosity Reservoir: 5-lire each Mixing disposable static mixer Built-in top mounted material reservoir Low Level Sensor (Optional) Xem thêm

   Liên hệ
8. 

   MM3000GP Series Gear Pump Meter Mix Dispensing System

   Features Gear pump volumetric accuracy at ±2% Able to be customized to handle material viscosity ranging between 1 cps – 1M cps Handle multiple mixing ratios ranging between 1:1 to 1:10 without hardware changes (subject to process limitations) Ability to be used as a standalone system or be integrated with robots Interactive and user-friendly software,... Xem thêm

   Liên hệ