Adhesive - Epoxy - Sealant - Bonding in Electronics Technology

Jowatherm ® PO 238.97

Jowatherm® PO 238.97 is core packages are assembled with thermoplastic polyolefin (PO) hot melts. Compared to standard polyamide (PA) hot melts which have been the standard product for this application for many years, PO hot melt adhesives are characterised by significantly better oxidation stability. This leads to substantially reduced production... Xem thêm

BALINIT® A

It all began with titanium nitride. BALINIT® A moreover continues to be a versatile wear protection coating that provides effective reduction of abrasive and adhesive wear in many varied applications. It is also applied decoratively or as a wear indicator, or used for special applications as low-temperature coating BALINIT® A ARCTIC at temperatures... Xem thêm

BALINIT DYLYN

Outstanding corrosion protection and anti-adhesion properties, have made BALINIT® DYLYN a well-established coating. Its wear protection and friction properties are especially important for mechanical engineering, plastics processing and the semiconductor industry. During the process of Plasma Assisted Chemical Vapour Deposition (PACVD), chemical reaction is caused by plasma excitation and ionization. Optimum quality... Xem thêm

BALINIT FUTURA NANO

The high hardness and tenacity of BALINIT® FUTURA NANO gives outstanding protection against abrasive wear and erosion, making it ideal for highly stressed precision components even under high thermal conditions. This is also the major benefit for plastic injection moulding and HSS and carbide tools. The titanium aluminium nitride (TiAlN) structure results... Xem thêm

Bayfol® LR 5902

* These values provide general information and are not part of the product specification. Regarding thickness and width, certain restrictions may apply. MD/CD values may vary depending on thickness and width. Our „General Conditions of Sale“ also apply. 1) Calculated based on information by raw material suppliers and the film ’s composition. 2) Based on data... Xem thêm

Makrolon® FR6019 CTI

Property Test Condition Value Unit Standard Melt Volume-flow Rate (MVR) 300 °C/ 1.2 kg 13 cm³/10 min ISO 1133-1 Molding Shrinkage, parallel 60x60x2 mm/ 500 bar 0.50 - 0.60 % ISO 294-4 Molding Shrinkage, normal 60x60x2 mm/ 500 bar 0.50 - 0.60 % ISO 294-4 Melt Viscosity 1000 s^-1^/ 300 °C 200 Pa·s b.o. ISO 11443-A Property Test Condition Value Unit Standard Tensile Modulus 1 mm/min 2,470 MPa ISO 527-1,-2 Yield Stress 5 mm/min 66 MPa ISO 527-1,-2 Yield Strain 5 mm/min 6 % ISO 527-1,-2 Nominal Strain at Break 5 mm/min > 50 % ISO 527-1,-2 Strain at Break 5... Xem thêm