HOÁ CHẤT CÔNG NGHIỆP ĐIỆN TỬ

1. 

   Solstice Thermal Two-Part Hybrids HLT10000/HGP14

   Two component hybrid thermal gels can be cured in a short time after two-component mixing at room temperature. HLT series thermal gels require curing but very little pressure during installation (5-10psi or the weight of a heatsink is sufficient). You can speed up the process by curing at elevated temperatures... Xem thêm

   Liên hệ
2. 

   Solstice Thermal Interface Material (TIM) PTM7950 / PTM6880

   As a category leader in the Phase Change Material (PCM) space, Solstice is proud to introduce PTM6880, an advanced Phase Change Material (PCM) that provides superior reliability (pass 150˚C baking 1000 hours, thermal shock 1000 cycles, and maintains low thermal impedance (<0.06˚C.cm2/W@ no shim), making it an ideal choice for... Xem thêm

   Liên hệ
3. 

   WACKER LUMISIL® UV and Thermal Series

   Especially, LUMISIL® UV products have a different curing mechanism than that of acrylic OCRs. No side cure process is needed for curing the shadow area, which simplifies the lamination  rocess and increases versatility for different structural designs. Feature • Highly reliable: Excellent for harsh testing conditions• Low shrinkage (< 0.1%, before/after cure): Mura-free, better for large sizes• Low E... Xem thêm

   Liên hệ
4. 

   WACKER - SEMICOSIL® 811/871

   Features of SEMICOSIL® 811 • High flexibility, high-temperatureresistance and low-stress adhesive• Fast adhesion built-up at room temperature or with moderate energy input (< 10 min at 60 – 80 °C)• Reduced cycle times (faster processing)• In-line QC process possible• No UV-transparent substrates needed• Allows automated optical inspection control, blue fluorescence under black-lightApplications• Automotive electronics•... Xem thêm

   Liên hệ
5. 

   WACKER - SEMICOSIL® 911/912/914/915/917/949/962TC

   Outstanding Electrical ParametersWith a silicone gel from WACKER, you have a material with outstanding electrical parameters. The reason for this is silicone gels’ high chemical purity and very low water uptake. In addition, silicones are exceptionally aging resistant due to their chemical structure. As a result, theymaintain their specific electrical properties for a long time.Resistant to... Xem thêm

   Liên hệ
6. 

   SEMICOSIL® For The Semiconductor Industry

   Applications: SEMICOSIL® products for the semiconductor industry are used as Precursors for Si-containing insulating layers including low-k and ultra-low-k applications Adhesion promoters for photolithography Etching agents for regular post-treatment, without risk of contaminating, e.g. epitaxy chambers Components for polishing agents, which mostly serve as mechanical abrasion components in the slurries Our comprehensive product portfolio covers both front-end... Xem thêm

   Liên hệ
7. 

   Oerlikon SUMEBore - High Performance Cylinder Bore Coatings

   Atmospheric Plasma Spray vs. Wire SprayPowder-based atmospheric plasma spray (APS) always had one key advantage over wire spray: the ability to choose from a broad range of materials and to combine several mate-rials to impart multiple benefits on the substrate. These benefits include friction reduction, wear and corrosion resistance. Today, APS... Xem thêm

   Liên hệ
8. 

   DuPont ™ DryFilm RA Dispersions

   DuPont™ DryFilm dispersion products are used in three major areas as dry lubricants, releaseagents, and additives to other compounds to improve lubricity and retard fouling. Dry LubricantThe low coefficient of friction that is characteristic of DuPont™ DryFilm polymer translates to superior effectiveness as a dry lubricant. DryFilm dispersions are the lubricant of choice... Xem thêm

   Liên hệ