Tất cả sản phẩm

BALINIT FUTURA NANO

The high hardness and tenacity of BALINIT® FUTURA NANO gives outstanding protection against abrasive wear and erosion, making it ideal for highly stressed precision components even under high thermal conditions. This is also the major benefit for plastic injection moulding and HSS and carbide tools. The titanium aluminium nitride (TiAlN) structure results... Xem thêm

Micro Arc Welder – the universal precision welder

Precision TIG welder for industry with long-term proven welding curves for all common weldable metals and alloys. Enormous versatility of the welding machine thanks to the power range from 5 – 1200 A, even for very thin material thicknesses High maximum power if required for penetration depths of over 1 mm (with 1.3 mm... Xem thêm

Arc Welding Inverter 180A-110V Model : RH-4603V

IGBT technology for better welding quality , greater welding penetration ,reduced energy consumption and increased efficiency Unbeatable automatic short circuit current protection, easy ignition, less spark, provides excellent arc strike performance at rust surface Run 3.2mm MMA electrode Multi protection of over voltage, over heat, over current and over load protection Hot start, anti-stick,... Xem thêm

CORMASTER® C2

CORMASTER® C2 are non-metallic structures made from NOMEX® T722 paper sheets, bonded together and coated with a phenolic resin. The cell size and density determine the mechanical characteristics. Cell sizes from 3.2 to 9.6 mm (0.13 to 0.38 inches) Hexagonal and overexpanded configuration Density range from 24 to 144 kg/m3 (1.81 to 7.68 lb/ft3) Product features and advantages Excellent... Xem thêm

Bayfol® LR 5902

* These values provide general information and are not part of the product specification. Regarding thickness and width, certain restrictions may apply. MD/CD values may vary depending on thickness and width. Our „General Conditions of Sale“ also apply. 1) Calculated based on information by raw material suppliers and the film ’s composition. 2) Based on data... Xem thêm

Makrolon® FR6019 CTI

Property Test Condition Value Unit Standard Melt Volume-flow Rate (MVR) 300 °C/ 1.2 kg 13 cm³/10 min ISO 1133-1 Molding Shrinkage, parallel 60x60x2 mm/ 500 bar 0.50 - 0.60 % ISO 294-4 Molding Shrinkage, normal 60x60x2 mm/ 500 bar 0.50 - 0.60 % ISO 294-4 Melt Viscosity 1000 s^-1^/ 300 °C 200 Pa·s b.o. ISO 11443-A Property Test Condition Value Unit Standard Tensile Modulus 1 mm/min 2,470 MPa ISO 527-1,-2 Yield Stress 5 mm/min 66 MPa ISO 527-1,-2 Yield Strain 5 mm/min 6 % ISO 527-1,-2 Nominal Strain at Break 5 mm/min > 50 % ISO 527-1,-2 Strain at Break 5... Xem thêm